D-link wireless router setup vista

To reset your device to default settings , press and hold the reset button on the back of the router for 10 seconds and release. The lights on the front of the router should all flash and reboot. If you still need additional assistance, please visit support. All rights reserved. Connect with. Remember Me. Username or Email.

If you do not have this information, contact your Internet service provider ISP. Do not proceed until you have this information. Users with Cable providers — Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. Quick Setup Instructions Step 1: Connect the included power adapter to a wall socket and your router Step 2: Connect the Ethernet cable to the WAN or internet port of both your modem and router, connecting the two.

If successful, the Internet Setup will be skipped. This password is what you will need when connecting to your wireless signal for the first time. Enter a password for your router.

This password is needed when you want to log into the router configuration setup page. Note : This is not your wireless password Select your Time Zone. A summary of your wireless settings is displayed. This includes your wireless network name and your wireless password. Click Save. The router will now reboot to apply your new settings and the setup is complete.

Share Tweet. Jonathan Walton. Then press Enter on your keyboard or OK on the screen. Now you will click on Wireless Settings on the left side of the screen. When the new screen loads on the right, you can rename your wireless network by changing the Network Wireless Name. Now boxes will appear below that labeled Passphrase and Confirmed Passphrase. This is where you will type what you would like your wireless password to be.

Once you have entered your password, press Save Settings towards the top of the screen. After you have pressed Save Settings, the router will now broadcast a secure wireless broadcast. Any of your wireless devices will initially have to type in the passphrase which was entered into the wireless router. If you continue to have any problems, feel free to contact the Helpdesk at 1.

Networking Devices Viewed times since Wed, May 18,