Archos 700 av manual

You may need to adjust this if the AV seems to send only half the digits of a channel or more digits of a channel. Example: Adjust the key delay and retest channel select if it sends channel 2 instead of 12 or sends instead of Page 16 I-Frames to cut at. Go to the I-Frame you desire and then set your Mark. Page Using Mpeg-4 Translator You should download the codec and install it on your computer.

Page Button Control To lock the AV buttons, select the lock action icon on the main screen and press the Select button. Press the Select button again to unlock the buttons. It is a system for indexing your music by album, artist, song title, etc.

Page The Resume Function If you delete a Playlist from your AV , you are only deleting the list and not the music itself. Then it will take the Album name ID3 tag, and create a subfolder with that album as its name. Progressive JPEG images are not supported. Page Viewing A Slideshow From the main menu, click on Browser. Page 33 The double browser can be used in: Photo View The left panel is the connected USB device ex: digital camera or hard drive and the right panel the AV hard drive contents.

Your battery power will be consumed at a higher rate than normal. It is normal that the AV will get hot. Non Mass Storage Class devices such as printers, Ethernet adapters, mice, keyboards, etc. Page Settings Each track in the directory is played for 10 - 90 seconds.

This allows a quick sample of each song. The AV will then revert to single directory Page Clock Settings The time of day is shown on the top right of the screen in either 24 hour or 12 hour display mode. To set it, select the Settings action icon then select Clock. Page Appearance Settings Standby mode. It will go into Standby mode. This way, it can wake up to make a scheduled video recording. When set to Hard Drive , your AV will act as an external hard drive mass storage device when connected to a computer.

Page Tv Docking Pod Description S-Video in — input you can use a standard s-video cable not included for your video input d Adapter connection — connect the included power adapter here e Infrared Emitter jack — plug in the included infrared emitter if you want the AV to control a VCR, cable box, or sat. Every VCR, cable box, and satellite receiver has a different infrared code to tell it to turn on and off and how to change channels. Page Replacing The Battery 1. Then, lower the battery into its compartment 2.

Finally, remember to move the slider latch towards the top of the AV in order to secure the battery inside its compartment 3. Errors or omissions excepted. Images and illustrations may not always match contents. All rights reserved. Because some jurisdiction do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitations may not apply to you.

Thus, two or less defective pixels is not grounds for replacement or repair of the product. This manual is also suitable for: Print page 1 Print document 55 pages.

Rename the bookmark. Delete bookmark? Cancel Delete. Default mode. Adjusts the video size to best adapt to the built-in screen or television.

Sides may get slightly cut in this mode. The entire picture will always be seen on the television and the built-in screen. No cutting. If you are watching a video and would like to place a bookmark in it in order to continue from this point at another time, you can use the Bookmark function.

Highlight the icon and click on the Select action button. Setting more bookmarks will then start to erase the oldest bookmarks. Select this icon to shut off the On Screen Display the status bar, action icons, and other overlaid informational graphics. When you turn on your AV you may notice that the icon which is highlighted on the main screen is not the Video icon but rather the Resume icon.

The AV plays. It can also play. See the chapter. With your TV docking pod properly connected to a VCR, cable box, or satellite receiver, making a recording is a simple affair. See the relevant chapter for instructions on connecting the TV docking pod to your television system. Select VideoCorder on the main menu screen. In the prerecord screen, you should see movement on the sound level bar indicating that sound will be recorded. Before starting the recording, you can adjust the recording parameters via the Setup action icon.

However, by selecting the recording settings , you have access to a number of parameters that you can change before you start the recording. See the table below for descriptions. The AV will take a few seconds to complete the proper saving of the. On, Off. If set to On, the AV will stop recording after the duration set in the next line.

For example, you want. If set to Off, the recording will continue until you click on the. This is the duration of time your manual recording will last if Auto Stop Rec above is set to On. This is a safety margin added to the beginning of a scheduled recording which was set via the My Yahoo! It affects ONLY these recordings.

This is just in case the clocks. This is a safety margin added to the end of a scheduled recording which was set via the My Yahoo! This is just in case the clocks between your AV and. Composite, S-Video, Auto. You can choose which video input you want the AV to use. Normally, with a good.

Auto, , , , 2. This is the aspect ratio of the screen that the AV will record. You can set this manually,. Optimal, VGA. Use this to set the resolution of the recorded image. You can leave this on Optimal. Optimal VGA x will give sharper images,. Use this to set the encoding quality similar to the idea of. JPEG image quality settings. The higher the encoding rate, the higher the image quality but also more hard drive.

The sound sampling rate. The higher value gives a higher quality sound but will take up more space. There is no need to set anything. You will see the signal type, as well as the selected aspect ratio on the top left of the pre-recording screen. Too far to the right will often give an overdriven distorted quality.

Too far to the left may make for a very soft sound. Try a few recordings to get a sense of what is the best sound level. Do not let the headphone volume fool you. The default location for video recordings is the folder called Video. If you click on the Video icon in the main menu, you will go to this folder. Notice that there is a Launch Videocorder action icon. Each time you use this button to record video instead of the VideoCorder icon in the main menu, you set the recording default location to the current folder.

If you go to this folder and then make a recording using the Launch Videocorder action icon, you will set the default record location to this folder. If the source of your video is copy protected, the AV will record in protected mode. If you would like to make a video recording for a future date or time, you can use the scheduler. You can program up to twenty different recordings up to one month in advance. Once you program your dates and times of recording, press the action button OK to set them.

If left alone, the AV will go on standby itself. Set each line to the desired date, time and channel if you are using the Infrared emitter to control your VCR, cable box, or satellite receiver. Click on the bottom action icon Edit program title and give a name of your choosing. Click on the save icon to save the program.

Empty Scheduler, ready to be programmed. Once a valid record time is entered, and the save button pressed, the empty box will get a green checkmark. Scheduler after having been set. This is for people who do not use the stick-on infrared emitter. That is, if you are listening to music, watching a video, or looking at photos on your AV , it will not interrupt you in order to go make the scheduled recording. This is only in the case of recordings that are over 2 GB in size.

For those who have a My Yahoo! This way, you do not have to input all your scheduled recordings manually. You can sign up for an account and learn how to use the My Yahoo! Please note : Using the scheduler is particularly useful when you have the TV docking pod and you have set up the Infrared connector.

Otherwise, the AV will be unable to change channels on your tuner. It will record the currently selected channel. Furthermore, the AV needs to be powered by a charger in order to go into standby mode rather than switch off completely. Go to your personal Yahoo! Choose the Week view — starting with the current day as the beginning of the week. Click on Printable View to show a cleaner printable version. Once you disconnect the AV from your computer, the AV will automatically update its scheduler with the newly saved TV programs from your My Yahoo!

If the AV encounters a television station name that it does not know the channel number for was never set , it will indicate so, and direct you to go to the scheduler to manually assign a channel to the station name. If you want to delete scheduled items, you must do this in the AV scheduler itself. Move the cursor to the line containing the? You can now scroll through the channel numbers and assign a number to the station name for that event.

You only have to do this once. The AV will keep the station name and its channel number. This is a one time step to set your AV to send the correct infrared codes to control your video cassette recorder, cable box, or satellite receiver.

This is done so that the AV , via the TV docking pod, can turn on and off your video device and also change its channels. If you do not plan on making scheduled recordings, then you do not need to install the IR emitter or set the infrared emitter code.

Connection 5 : the Infrared Emitter of this manual if you do not know where the IR receptor on your VCR, cable box, or satellite receiver is located. Select the type of device that you will stick your IR Emitter to. You have the choice of either a VCR video cassette recorder ,. Cable Box , or Satellite Receiver. Select the brand of your device. Click on Tune IR Emitter button.

The TV Channels button allows you to give names to each channel. For example, if channel 6 is CNN where you live, then you can give channel 6 that name in this screen. Or, if you use the My Yahoo! Automated Yahoo! This screen allows you to correctly set the codes and parameters to allow the Infrared emitter to correctly control your tuner VCR, cable box, or satellite receiver. Tune device code one code available : Some manufacturers use only one code for all of their products. The code does not change from one model to another or from one year to another.

In this case, there will only be one single code available. You can now test the channel select. They have various code sets for various models and various years. In the example screen, you see the code V If this code does not work when doing the Test: channel select , advance it to the next code and then test to see if that next code works.

Test channel select: When you press the Test channel select button highlight test channel select and press ENTER , the AV will send a signal through the docking pod to the infrared emitter and change the channel on your tuner VCR, cable box, or satellite receiver. If the Number of digits parameter is set to three, it will try to select channel If that parameter is set to 2, it will send the code for channel If your tuner does not change channels when you click on this test button, try the next code for your device step 2 above.

Click this test button again and your device should change from on to off or off to on. If pressing this button does not turn your device on or off, try the next code for your device step 2 above.

If none of the codes work, check that the infrared emitter is stuck directly over the infrared sensor on your tuner device. Tune channel select: These four parameters usually do not need to be set.

Keep the default values to start with. See the table below for an explanation of each. Set the number of digits that your device can recognize for a channel. Example: Set to 3 if you need to choose a. Example: If you normally press 1, 3, Enter for channel 13, then you would need to set this parameter to On.

Change the delay between the emission of each digit of a channel. You may need to adjust this if the AV seems. Example: Adjust the key delay and retest channel. The actual video information is not deleted.